Clarity W-1000 User Manual download pdf (Page 16)

W-1000

Page 16

Programming

Continued

3. Pick up the handset from the phone

base, press and release the “PROGRAM”

button on the base unit.

4. Dial the number you wish to store.

The number is not transmitted while

you are programming it. You can

program a pause into the dialing

sequence, if necessary. Since there is not

a separate pause button on the phone,

the redial button serves this purpose

during programming. Remember, you can

store up to 15 digits and the pause

function counts as 1 of those digits.

1. Pick up the handset and listen for a

dial tone.

2. Press the appropriate Emergency

Button.

3. The number will be dialed

automatically.

To Dial Programmed

Emergency Number:

Note: Programming in the pause

function will cause the phone to

wait 3 seconds before dialing any

more numbers. For example:

Pressing a memory button that

has 9<P>555-1212

programmed into it will dial the

number 9, then wait 3 seconds

and dial 555-1212. In most

cases, you will not need to use a

pause.

Important: The

emergency buttons are

not preprogrammed for

911. You must do this

yourself. Use a preprinted

911 label and paste it

over the button you

program for 911. Use

other write on labels to

identify any numbers you

wish to program into the

two remaining emergency

buttons.

7. Place handset back into cradle.

5. Press the “PROGRAM” button again,

and then the appropriate Emergency

Button.

6. Repeat steps 3, 4, and 5 for the other

two Emergency Buttons.

E

N

G

L

I

S

H

W1000_User_Guide 11/15/99, 9:38 PM16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Comments to this Manuals

No comments